BRASAAC · Building remediation · Sydney NSW

Facade Remediation.
Building Restoration.

BRASAAC specialises in building remediation, maintenance and defect rectification across Sydney, restoring and protecting existing buildings. We deliver remedial works to facades, exposed roofs, balconies, planter boxes, bathrooms and wet areas, addressing water ingress, material deterioration and construction defects.

Section drawing of an apartment building showing where BRASAAC works: the facade and its cladding, sealant joints and coatings, rope access from the roof, slab edges, the exposed roof, balconies, a planter box and a bathroom. Drain Section A–A · NTS 0502030107040506

02 · Exposed roofs & balconies

Falls before
waterproofing.

Correct falls promote drainage and reduce ponding, supporting the performance of the waterproofing system. Scroll to see how we rectify the substrate on exposed roofs and balconies.

Our work

Real sites. Real repairs.

Exposed roof being ground back by the BRASAAC team
Current project

Exposed roof remediation, Sydney

Existing finishes stripped out and the substrate being ground back. Next: concrete repairs, substrate rectification and falls correction to the drains, with joint repairs at the parapets.

Two rope access technicians working high on an apartment facade Facade · Rope access
Our rope access team on a residential facade.
Rope access technicians cleaning down a facade Facade · Rope access
Facade surfaces cleaned down by rope access.
Balcony screed laid with falls to the drain Balconies
Balcony screed laid with falls to the drain.
Balcony floor works around skylights Balconies
Balcony floor works around the skylights.

More from site on Instagram.

@brasaacau

Independent substrate inspection

25 of 25 wet areas compliant.

After substrate rectification and falls correction on a residential project in Sydney, an independent inspector checked every wet area against AS 3740:2021 before the waterproofing went down.

25Areas inspected
25Compliant
100%Approved

Substrate test report · 25 of 25 areas compliant · residential project, Sydney

Wet area substrate marked up before falls correction
BeforeMarked up
Wet area substrate after falls correction, ready for inspection
AfterFalls corrected

How we work

Measured before. Checked after.

A repair that lasts is decided before the first bag of mortar is opened — and confirmed before we hand over.

Step 01

Assess the building

Site inspection, sounding and level survey. We review any consultant’s report and identify the cause.

  • Defect survey
  • Level & falls survey
  • Photo record
Step 02

Plan the works

Scope, methodology and access planned around occupied buildings, weather exposure and staging.

  • Clear written scope
  • Access & staging
  • Programme
Step 03

Complete the remedial works

Repairs carried out to the approved specifications and WHS measures in place.

  • Approved specifications
  • WHS measures in place
  • Clean, safe sites
Step 04

Quality assurance & handover

We check completed works against the agreed scope and applicable specifications, document the repairs and address outstanding items before handover.

  • Agreed scope checked
  • Repairs documented
  • Outstanding items addressed
Rope access technicians working along balcony edges on a residential facade
Our rope access team on a residential facade in Sydney.

About BRASAAC

Building Expertise. Practical Experience.

BRASAAC specialises in building remediation, maintenance and defect rectification across Sydney. Every defect is assessed before it is scoped, and every repair is tailored to the building’s condition and the project requirements.

We deliver the remedial works as a whole, from assessment and repairs to substrate rectification and finishes — across facades, exposed roofs, balconies, planter boxes, bathrooms and wet areas, with rope access for work at height.

Nayara ChulekManaging Director

Assesses the defects, prepares the scopes and checks the works against the agreed specifications.

Manoel RibeiroDirector · BuilderNSW Builder Licence 486383C

Runs the sites and the crews, and delivers the repairs on site.

Work at height. Rope access available across our facade services, subject to site conditions and project requirements — on existing buildings and new construction projects.

  • Strata managers & owners corporationsClear findings, photos and scopes, with works planned around residents.
  • BuildersSupporting builders throughout construction and handover, including works in difficult-to-access areas and after scaffold removal.
  • ConsultantsRepairs delivered to the project documentation and specifications.
  • Property ownersRemedial repairs tailored to the building’s condition and project requirements.

Request a quote

Tell us what’s leaking, cracking or falling.

A few details and a photo or two is all we need to start. We’ll get back to you to talk it through and book a site inspection.

WhatsApp — fastest, send photos0451 878 578
Emailinfo@brasaac.com.au
Service areaGreater Sydney & NSW · site inspections by appointment

Project details

2 minutes
How urgent is it?
Best way to reach you

Got photos? After sending, you can drop them straight into our WhatsApp.